Considered part of the software and hardware designed and manufactured the device for the automatic analysis of nonlinear parameters of high-temperature superconducting ceramics YBa2Cu3O7-x in variable magnetic fields. Shows the calibration and specifications. The new is a synchronous (the error in determining the phase of no more than 0.5%) of digital signal samples of the nonlinear response of the sample and the samples generated by an external magnetic field (the error is less than 1%), with the number of data samples per channel to 90 ∙ 106 12-bit samples and sampling 600 ∙ 103 samples per second. The reference range of variable magnetic fields 1 - 50 Oe, a frequency range of 1 - 50 kHz in steps of 1 Hz and the accuracy of 0.0291 Hz. The device has an interface to the computer via two USB-interface and original software to work with it. With the use of the device, a series of experiments designed to produce some non-linear parameters of cylindrical sample made of high-Tc ceramic YBa2Cu3O7-x. The analysis of the results and their comparison with the presented in the literature  

Keywords: Nonlinear medium, high-temperature superconducting ceramics, synchronous samples, harmonics, ARM-9 CPU, a differential sensor.

Principle of operation of a Turing machine and its variations, including finite automata, is to read the data tape; such an organization is a direct analogy with the coding information biopolimers, wich in turm served as the basis for the creation of several DNA-based computers. Computer input device in the form of O-DNA created before, however, the input and output demanded difficult reactions, each of which require human supervision.

Keywords: hardware basis cascade limitations hybridization ligativny cycle, coding information, computer DNA, enzymes, molecular software

The peculiarities of modification of silicon’s surface structure by the electric disintegration were researched. It was established that the electric disintegration of sensitive layer’s surface increases its effective area and the density of surface state. It also forms the deep energy levels in the forbidden zone of the semiconductor which are conditioned by atoms of the electrode’s material and by dislocation. In total it makes possible to modify the sensitivity and selectivity of gas sensors.

Keywords: modification of surface, sensitive layer, gas sensor, electric disintegration

The establishment of automated air monitoring systems is a promising way of the air monitoring devices development. The comparative analysis of literature has shown that thin films based on semiconductor metal oxides are effective and widely used material for air monitoring systems creation. In order to create effective and more sensitive sensors it is important to research processes that occur on the surface of the gas sensitive material when it contacts with different substances. The processes that proceed on the surface of gas sensitive material based on SiO2SnOxCuOy during the interaction with molecules of nitrogen dioxide. Quantum chemical calculations have shown that there are three possible mechanisms of interaction between the molecules of nitrogen dioxide with a surface of gas sensitive material.

Keywords: multitouch system of the monitoring, gas-sensitive material, molecules of dioxide of nitrogen

  The problem of air quality control is relevant at the present time. There are a lot of different devices and methods of air monitoring. The promising devices for air monitoring are automated air monitoring systems functioning in real time regime. The basic part of such system is a chemical gas sensor. Gas sensors can be combined into the arrays or so called multisensory systems to increase their effectiveness. Sensor arrays using semiconductor sensors based on SiO2CuOx, SiO2SnOxCuOy, SnOxZrOy, silver-polyacrylonitrile thin films made at department of chemistry and ecology have been investigated in this work. As a result of sensors signals processing gas recognition technique has been developed. The recognition of ammonia, nitrogen dioxide, chlorine has been made.

Keywords: monitoring, massifs of sensors, semiconductor sensors of gases

  This paper is devoted to development of gas sensors air control. It is shown that copper oxides are the promising materials for high sensitive sensors. The CuOx film material was syntheses by means of citrate sol-gel technique. The sensors fabricated on the basis of CuOx film material were sensitive to ammonia gas in the range of 25-150 ppm. Working temperature was determined as 180 °C. Such sensors can be used for work area air control of industrial enterprises.

Keywords: gas-sensitive element, atmospheric air, sensors, copper oxides

The mathematical model of the potential distribution in the semiconductor surficial region in the presence of deep-lying levels in its forbidden zone which specified by multiple-charge impurity centers has been developed. The simulation results can be used for the width of the space charge region estimation, for the prognostication of the most probable mechanism of the charge carriers transfer in metal-semiconductor structure with multiple-charge deep-lying levels and also for the prognostication of the barrier capacitance value. It can be used in the development of solid-state electronic devices with improved values of some parameters.

Keywords: Poisson’s equation, multiple-charge impurity center, potential distribution, deep-lying levels

  Stability of sensors on the basis of inorganic oxide materials is one of the primary goals by working out of atmospheric air control devices. In this work long-term stability of a sensor response on the basis of the SiO2SnOxCuOy material to carbon oxide (II) exposure in a range of concentration 1-100 ppm is studied. It is shown that the sensor response differs high stability and reproducibility. Continuous heating within 21 days to working temperature (350°С) influence its value negligibly.

Keywords: stability of a response, sensor, carbon oxide, material of structure of SiO2SnOxCuOy.

  Results of researches of gas sensitive properties of zinc oxide films grown by reactive rf magnetron sputtering was shown. Process parameters, affected on the gas-sensitive ratio, response time, recovery time and the type of electrical conductivity of obtained films were identified. Optimal modes of magnetron sputtering of zinc oxide for implementing gas sensors (RF sputtering Zn target in a gas mixture of oxygen and argon at a concentration of 80% oxygen, a chamber pressure of 0.8 Pa and the magnetron power 100 W) were established. Avarage response time on NO2 gas was 5-15 sec.  The obtained values ​​of the gas-sensitivity were in the range 30-67% for NO2 concentrations from 20 to 100 ppm, CO and CO2 from 50 to 100 ppm and 81-97% for higher gas concentrations from 500 to 1000 ppm.  

Keywords: Nanotechnology, magnetron sputtering, zinc oxide, thin films, gas sensitivity

  Technology of fabricating unheated gas sensors based on polyacrylonitrile (PAN) using different temperature and time modes of a two stages IR-pyrolyze is developed for the remote control of the human condition. Gas-sensing elements based on PAN films and cobalt- and copper-containing PAN films are fabricated. Gas sensitive characteristics of the gained samples to CO, Cl2 and CHCl3 in atmospheric conditions are determined. We have found that gas-sensitivity of the samples depends on the composition of the original film-forming solution and on the process parameters of fabricating the film material. Moreover the samples show sensitivity and selectivity at room temperature. The benefits of this study is that films based on PAN and metal-PAN are the most promising material for electronic engineering including gas sensors for the remote monitoring of the human condition.

Keywords: Nanocomposite materials, gas-sensing layer, metal-containing organic polymers, IR- pyrolyze

  In this work researches of structural and electrophysical properties of ferroelectric films of lead zirconate titanate (PZT) which afterwards is planned to apply in hybrid sensor systems are done. Values of capacities of the received samples are in the range from 200 to 1100 pF, the range of thickness of the received films is 300-1000 nanometers. X-ray analysis showed direct dependence of the quantitative maintenance of crystalline PZT in film structure from partial pressure of oxygen in the camera. By results of research the range of polarization of samples are in the range 0,06 – 2,2 µC/cm2, and values of calculated piezoelectric modules are in the range 0,04*10-12 – 13,3*10-12 C/N.

Keywords: sensors, segnetoelektric films, touch systems, piezoelectric modules.

  The integrated sensor LR-type on the basis of carbon nanotube is described. Are offered a method of processing of the sensor signals. Results of modelling are represented.

Keywords: Еlement base, microelectromechanical system, design, sensor, gyroscope, accelerometer.

  The experimental studies of technological modes of formation of the elements for hybrid microfluidic sensor systems using focused ion beams by nanotechnology complex UHV NANOFAB are performed. The parameters of the focused ion beam to enable the development of microfluidics components are determined. Methods of forming of microfluidics structures on silicon substrate are studied. Parameters of generated elements were studied by scanning electron microscopy and atomic force microscopy. Formed and studied filtration membranes containing holes from 105 to 150 nm in diameter. The results can be used in the formation of nanoscale structures and the development of manufacturing processes microfluidics components for hybrid systems and lab-on-chip.

Keywords: Nanotechnology, focused ion beams, microfluidics, hybrid systems, sensor, lab-on-chip

  The experimental studies of technological modes of formation of hybrid carbon nanostructures based on the nanotubes by multifunctional ultrahigh vacuum nanotechnological complex NANOFAB NTK-9 are performed. The parameters of the impact on hybrid nanostructures formation were found, established and studied experimental samples modified and Y-shaped hybrid carbon nanostructures . The results can be used as elements of nanoelectronics and nanosystem technology, composite fillings compounds and hydrogen storage.

Keywords: Nanotechnology, carbon nanotubes, hybrid carbon nanostructures, nanostructured materials

  In this work the technology of receiving high-sensitivity gas sensors on the basis of zirconium oxide is developed for hybrid sensor systems. Laboratory samples of sensors of gas on the basis of zirconium oxide are made with use sol-gel method. Gas-sensitive characteristics of samples of sensors in relation to nitrogen dioxide are defined: limit of detection and factor of gas sensitivity. The received gas sensors will help to determine approach of an attack of bronchial asthma some hours prior to its beginning by level of an oxide of nitrogen in exhaled air of the person.

Keywords: hybrid sensor systems, zirconium oxide, bronchial asthma, nitrogen dioxide

  The algorithm of the research, including the technology of making the mycelium film on the resonator of bulk acoustic wave and gas medium with the given concentration was developed. As a result of the investigations the sorption sensitivity of extracts of the higher shiitake mushroom mycelium to the fume of volatile liquids and gases (acetone, ethyl acetate, formaldehyde, chloroform, acetic acid and hydrochloric acid, hexane, 10% aqueous ammonia) was studied. The study has shown that there are the processes of making the mycelium films, which keep the initial values of the resonant frequency and the quality factor of the resonator after moving off the fumes or gases. This work has shown that the mycelia films are very promising as a new material for gas selective coatings of electro acoustic sensors.

Keywords: mycelia films, flying liquids, gases, gas electro-acoustic sensors

  Polypyrrole is a perspective material for gas sensors. Property of polymeric chains can vary largely depending on their packing. Power characteristics are studied. Features of a structure and power tetramers thiophenes with methyl, ethyl, propyl substitutions in position 3 pyrroles a cycle are investigated. The most perspective and stable tetramers are revealed from the thermodynamic point. The estimation of laws of formation of a polymeric chain is spent.  Influence of the assistant on stability tetramers is considered.

Keywords: Polypyrrole, quantum-chemical research, influence of alkyl substituents, tetramer, cycle, polymeric chain, power tetramers

The received results of modelling of a micromechanical sensor of angular speeds and linear accelerations are considered. 

Keywords: microsystm technology, element base, modeling, sensor, gyroscope, accelerometer

Digital compact proton magnetometer was created for measure the geomagnetic fields, including the fields of high heterogeneity. We described design of the instrument and its principles of operation. This device is using implemented digital filtering techniques and Prony method to determine the frequency of the desired signal. The experiments were made in the fields of high heterogeneity and demonstrated the possibility of precise measurements in the fields with a gradient of up to 8 mT / m. The device can be used as a metal detector, as well as for magnetic prospecting, geological studies, etc.

Keywords: nuclear magnetic resonance, free precession, proton magnetometer, geomagnetic field, digital filtering, Prony method

A design of the actuator, consisting of a thin layers of silicon dioxide and aluminum is proposed. There are calculations made of the response speed and heat dissipation of the actuator. By making the best selection of layer thicknesses and optimization stages of technological process, in particular the deep selective etching of silicon, the best performance on the angle of inclination of the actuator and the speed of the device could be achived. The greater the difference between the initial temperature and the heating temperature, the stronger the beam of the actuator is lowered to the plane of the silicon plate, and, therefore, less angle of elevation above the surface of the silicon plate. It is thus possible to control the angle of the beam by selecting the appropriate heater and voltage, providing the desired temperature. The design of the micromirror device based on the proposed actuator is provided. The developed design is based on the actuator and allows for controling the tilt of the mirror in a wide range.

Keywords: silicon, termoactuator, micromechanical systems, bimorph structure, micromirrors

In this paper, a new simple and accurate hybrid table/analytical model of the MOSFET drain current based on the interpolation of table parameters is proposed. This new hybrid table model has an accuracy similar to the pure table models but requires no complex parameter extraction. The drain current in the hybrid model is calculated as the product of the analytical model current and the correction factor approximated by two-dimensional series.

Keywords: MOS-transistor, MOSFET parameters, cryogenic temperature, parametric identification

The spectra of thermally stimulated conduction currents (TSCC) in (TmBi)3(FeGa)5O12:Ca2+ ferrite-garnet films have been investigated with the purpose to reveal electrically active centres. The samples were fabricated by liquid phase epitaxy (LPE) from melt solution on the Gd3Ga5O12substrates with the crystallographic orientation (111) with the use of Bi-containing flux (without Pb). Increasing the concentration of Ca2+ions in the films were realised by increasing the concentration of CaO in the melt solution. The obtained films contained Ca2+ ions from 0,03 f.u to 0,1 f.u. With the help of standard thermoactivation current spectroscopy the spectra of the initial samples and samples subjected to ultraviolet radiation and negative corona discharge were obtained. The characteristic parameters of electrically active defects were calculated.

Keywords: thermally induced electrical current, ferrite garnet films, electrically active centres, deep-level capture, charge compensation, Ca- doping, ТСТП-spectra, temperature position

  Proposed to use a sensor based on surface acoustic wave (SAW), which represents a delay line with unidirectional interdigital transducers (IDT) for measuring the pressure in the liquid. Reflective IDT loaded by series connected inductor and two capacities. One of these capacities - this trimmer, and another - a membrane capacitor whose capacitance depends on the pressure. When the pressure changes of the membrane capacitance capacitor, which changes the reflectivity of the reflective IDT. The magnitude of changes in this ratio determines the pressure applied to the membrane capacity.  

Keywords: Sensor, pressure, surface acoustic wave, pulse answer, liquid

Considers and researches dimensional stability advanced base polyimide materials for high-density PCB.

Keywords: Printed circuit boards, flexible printed circuit boards, flex-rigid printed circuit boards, foil dielectric materials, polyimide foil materials

The problem of interaction of mutually perpendicular magnetic fields in superconductors is considered. Possibility of use of a nonlinear susceptibility of superconductors for measurement of a magnetic field is shown, the assessment of sensitivity of the cryogenic probe magnetometer is carried out.

Keywords: superconductor, magnetometer, SQUID, cryotron, the crossed magnetic fields, non-linear magnetic, cryogenic probe