This article discusses the problem of determining the dynamicity coefficients in case of local damage to the truss in the steel frame of an industrial building. The analysis of the resistance of steel frames to local damage is an important area in the design of industrial buildings, especially those that belong to the category of increased responsibility. Damage to individual elements of the load-bearing system can cause a redistribution of forces and lead to a progressive collapse.

Keywords: diversification of management, production diversification, financial and economic purposes of a diversification, technological purposes of ensuring flexibility of production

The authors examine facade elements that were typical for residential buildings in Astrakhan in the first half of the 19th century. As in other Russian cities, housing construction here was carried out according to "exemplary" projects using classical architectural details. The study describes iconic architectural monuments with order decor of facades, as well as such common elements in Astrakhan as triangular pediments, simplified and shortened modillions, dormers and classical window frames. A unique feature of Astrakhan residential architecture is the yard galleries designed as colonnades of the transformed Tuscan order. In conclusion, the authors note that the facade elements generally followed the order and classical models, but were often simplified and loosely interpreted.

Keywords: classicism, residential architecture, "exemplary" project, architectural order, facade element, yard gallery, architectural heritage of Astrakhan

The article presents research in the form of comparison of safety factors in guy ropes of building structures designed using the limit state method and ropes of mast structures related to power engineering facilities, specified in federal norms and rules. It is demonstrated that the use of safety factors for guy ropes of mast structures, justified by the theory of reliability, allows to effectively solve the problem of assigning rejection criteria for guy ropes, and can be used in developing recommendations for their inspection, technical diagnostics, and operation based on the existing known rejection criteria used for lifting structures.

Keywords: building structures, wooden structures, membrane panel, stress-strain state, radial beam dome, dome, membrane, design, experimental study

The aim of the research is to develop defect catalogs of single building structures for operational digital building information models. The importance of standardization of defect description for improving the efficiency of life cycle management of capital construction objects is emphasized. The study of existing software solutions is carried out, their limitations in the context of defects accounting are revealed. A catalog of defects including visualization and description of key parameters is developed using Renga software. The presented results demonstrate the potential of digitalization of diagnostics and repair planning processes, as well as the need for further development of functional capabilities of BIM-tools to account for dynamic changes in the state of structures.

Keywords: operational digital information model, defects of building structures, defect catalog, defect classifier

The article examines the Lepeshinsky House in Nalchik as a significant architectural and cultural heritage site. It describes the historical aspects of its construction in the late 19th century, architectural features and artistic elements that make the building unique. The authors emphasize the importance of preserving this monument for future generations and its role in shaping the cultural identity of the region. The article also discusses current problems of the building’s operation and plans for its restoration aimed at restoring its historical appearance and preventing further destruction. Key aspects include the need to protect cultural heritage and draw public attention to the significance of such objects for the history and culture of the people.

Keywords: Lepeshinsky House, Nalchik, architectural heritage, cultural heritage, historical building, restoration, preservation, architectural features, mansion, Kabardino-Balkarian Republic

This article presents a conceptual framework for assessing the maturity of construction control and supervision systems at construction sites. A multi-level assessment model has been developed, integrating the Analytic Hierarchy Process (AHP) and fuzzy comprehensive evaluation method. A five-level taxonomic system for grading the maturity of regulatory mechanisms in the construction industry is proposed. The procedures for forming a hierarchical structure of assessment indicators, constructing judgment matrices, determining weight coefficients, and applying the fuzzy comprehensive evaluation method to quantify the maturity level of supervision systems are described in detail. The developed methodology represents a universal tool for conducting comparative analysis of construction control and state supervision systems in various national and regional jurisdictions based on objective quantified criteria.

Keywords: construction control, state supervision, maturity model, Analytic Hierarchy Process, fuzzy comprehensive evaluation, quantification, assessment indicators

In territorial planning, the choice of industrial territories is crucial for the state. The advantageous location will allow for the creation of labor application points to ensure stable economic growth. Understanding and taking into account the parameters of the formation and further functioning of such territories always require an integrated approach, that is, taking into account both economic and social, spatial and environmental factors. When planning, the accessibility of transport infrastructure, the availability of raw materials, tax incentives and other economic incentives can be key when choosing a particular area for the location of industrial facilities on it. An integrated approach can become especially relevant not only when planning new undeveloped territories, but also when converting existing large production areas.

Keywords: socio-economic development, comprehensive assessment, factors of the urban planning system, industrial park, industrial zone

The article considers the issues of improving the technology of preparing concrete mixtures for road surfaces at existing concrete mixing units without additional costs for their technical re-equipment. The essence of improving the preparation of concrete mixtures lies in the complex use of carbonate microfiller and superplasticizer additives in combination with the developed innovative method of preparing concrete mixture. The article shows that when using a polycarboxylate superplasticizing additive and a microfiller based on porous shell limestone in combination with the proposed method of preparing concrete mixture, it is possible to obtain road concrete with the required strength properties with a cement consumption reduced by 50 kg/m³.

Keywords: road concrete, superplasticizer, mineral micro filler, method of preparation of concrete mix

The article is devoted to the study of the physical and mechanical characteristics of alluvial sandy soils in the process of strengthening, in order to improve the efficiency of development of floodplain-alluvial territories for construction after the completion of the alluvial process. The studies were conducted in the territory of the Khabarovsk region, where the thickness of the alluvial layers was 2.5–5.5 meters. The study made it possible to substantiate the optimal timing for the start of construction on alluvial territories and to develop a method for assessing the mechanical properties of the soil, increasing the reliability of construction solutions.

Keywords: alluvial soil, stage of diagenesis, alluvial map, penetrometer, granulometric composition, pit, sounding borehole, conditional dynamic resistance of soil

The study is devoted to the development of electronic and distance learning tools for mastering the skills of applying mathematical methods by specialists in the field of automated systems development. The concept (structure) of an automated information system (AIS) for managing the life cycle of exercises to study optimization methods has been developed and schematically presented. An important element of decision support in the AIS is software simulators (training and training components) that generate exercise options and automatically check them based on the properties of mathematical models of optimization problems. An algorithmic and prototype software for the training subsystem for monitoring the skills of solving optimization problems have been developed. Variations in the interfaces for constructing a mathematical model for an optimization problem by a student when performing an exercise in the AIS are demonstrated. Building a model in the interface and, accordingly, the complexity of the exercise depends on the number of model parameters that can be changed by the student. The simulator provides an integral assessment of the student's actions when performing the task. The introduction of the simulator into the digital educational environment of the university will automate and simplify the implementation of current and intermediate control of knowledge and skills in the disciplines studied.

Keywords: optimization problems, mathematical programming, decision support, software simulator, mathematical modeling of systems and processes, visual modeling

Two capacitive methods of measuring the linear density of one-dimensional fibrous products are considered. The sensitivity of the measurement results to variations in the geometric and physical parameters of the measuring device for the differential and resonance measurement methods is estimated. A weak, almost linear dependence of the measurement error on parameter variations in a wide variation range is established. The good suitability of both methods for measuring the linear density of one-dimensional products by the capacitive method and the high correlation between the measured value and the measurement results are substantiated.

Keywords: fibrous materials, one-dimensional products, linear density, capacitive measurement method, capacitive method, differential circuit, resonant measurement circuit, parameter variations

The paper considers the plane motion of a heavy material point in a quasi-static medium under the influence of gravity, aerodynamic forces and thrust forces. This problem can be considered as a continuation of Zhukovsky's problem of modeling the longitudinal flight of an aircraft, assuming that the angle of attack is constant, taking into account the effect of thrust. The equations of motion in different coordinate systems are obtained. Stationary flight modes have been found. The stability of the most basic modes is investigated. A numerical solution of the equations of motion is found and the behavior of trajectories in various flight modes is investigated.

Keywords: thrust force, material point, Zhukovsky's problem

For the development of automated systems for designing ultraviolet irradiators intended to compensate for the deficiency of natural ultraviolet, it is critically important to know the spatial distribution of the erythemal radiation power. However, there are no suitable sensors for direct measurement of this value on the Russian market. In this regard, an alternative method for determining the erythemal radiation power is considered, which does not require the use of specialized erythemal-sensitive receivers. The method is based on obtaining the spatial distribution of the erythemal radiation power by taking into account the curve of the relative spectral erythemal efficiency of radiation and preliminary measurements on a gonioradiometric setup of the distribution of energy illuminance in the UVA (320 - 400 nm), UVB (280 - 320 nm) regions and the relative spectral distribution of the irradiator or radiation source for one arbitrarily selected direction in the wavelength range of 280 - 400 nm.

Keywords: ultraviolet radiation; erythemal radiation; irradiation units; measurement method, radiation strength; spatial distribution of erythemal radiation strength, method

The paper considers the issue of using a computer vision system to control the quality of products in the control algorithm of a mechatronic sorting station. Shoe products are chosen as an example. The developed system is based on machine learning methods for image recognition by segmentation. As a result, a neural network model was created, and a program was written for identifying and selecting objects using a camera for subsequent sorting of defective products. The program contains three modules: initialization for declaring all variables, models, classes, video stream from the camera; the main module, containing an internal loop for each segmented object; a subroutine for completing the work. The introduction of computer vision into the control algorithm increases the efficiency and flexibility of the quality control system, and improves the accuracy of measuring the parameters of objects for their subsequent sorting.

Keywords: mechatronic station, sorting, computer vision, image segmentation, neural network training, control algorithm

This paper presents the results of an investigation into the adhesion properties of release coatings based on polyisobutylene applied to metallic substrates. A software tool was developed in Microsoft Visual Studio using the C++ programming language to compute the composition and effective technological parameters for forming coatings that ensure optimal adhesion to protected surfaces. As a case study, the method of calculating the relationships between composition, temperature, and formation time is demonstrated for coatings achieving the highest adhesion, corresponding to a score of “zero” on the standardized six-point cross-cut adhesion test. It is shown that the application of the developed software enables parameter evaluation within 1–2 seconds. The computational results are experimentally validated. The morphology of the coatings was examined using optical microscopy. It was observed that no delamination occurs at the intersection points of cuts or within the grid pattern.

Keywords: coating, adhesion, microstructure, cross-cut test, polyisobutylene, optimization

This article examines the use of a dual-circuit closed-loop system for pulsation combustion of solid fuel in agricultural services. The results of research on gas self-oscillations during wood waste combustion in a Helmholtz resonator-type installation are presented. It has been established that with certain geometric characteristics of the installation, a significant sound pressure level (up to 165 dB) can be achieved in the combustion chamber while maintaining a low noise level (up to 65 dB), which contributes to increased combustion efficiency and meets environmental requirements. Potential applications of this technology are proposed, including agricultural waste utilization, drying of agricultural products, and heating of greenhouse complexes and livestock facilities.

Keywords: Pulsation combustion, Helmholtz resonator, solid fuel, agricultural waste, energy efficiency, biomass utilization, agro-industrial complex.

The paper presents a review of the causes of phase shift formation in differential communication lines. A zigzag tracing method with an angle of 12° is proposed to compensate for the inhomogeneity of the glass fabric. A method for calculating the formation of skew in the length of conductors at turns with and without rounding is presented.

Keywords: differential pair, differential communication lines, signal phase shift, static skew, dynamic skew, delay, back drilling, non-uniformity effect, fiberglass weave, layout

The results of a study of induction wireless charging methods for batteries of unmanned aerial vehicles (UAVs) are presented. An experimental simulation of energy transfer using inductive coupling has been carried out. The main factors influencing the efficiency of the system are determined: the distance between the coils, the accuracy of their alignment, and heat losses. It is shown that energy losses with increasing distance reach 45%, and when the coils are shifted by 3 cm, the transmission efficiency decreases by more than 45%. Recommendations have been developed to improve efficiency, including optimizing coil materials, increasing the frequency of energy transmission, automating coil alignment, and introducing active cooling. The results obtained form the basis for further improvement of UAV wireless charging systems.

Keywords: wireless energy transmission, induction methods, resonant induction, unmanned aerial vehicles, optimization of charging systems

This article presents a conceptual model of the reconstructive solution of an industrial enterprise in the structure of a large industrial unit in the engineering industry. Based on the multifactorial analysis of the enterprise, a model was proposed that ensures the compliance of the reconstructed production environment with the updated requirements for industrial facilities located in the structure of dense urban buildings.

Keywords: industrial buildings, reconstruction of industrial buildings, architecture of industrial buildings, aesthetics of industrial buildings, conceptual models of industrial buildings

The architecture of a multi-agent system defines the basic principles of its formation and operation, including the format of the organizational structure representing a graph in which agents act as vertices, and the links between them are designated by edges. A common drawback of existing approaches to representing the architectures of multi-agent systems is the support of no more than two types of organizational structures, among which the optimal one for the given environmental parameters may be absent. This paper proposes a method for representing the architecture of a multi-agent system, implemented by borrowing the mechanisms of living nature, namely the principles of organizing animal communities. The proposed approach allows modeling organizational structures of the following types: "coalition", "team", "hierarchical structure", "federation", "congregation". To determine the optimal architecture of a multi-agent system, optimal for specific environmental conditions, it is possible to use a "genetic algorithm".

Keywords: multi-agent system, architecture, agent, organizational structure, optimization

The methods and approaches to reduce the wear of bearings and blades of electric generators are analyzed to increase the service life of the equipment, improve its reliability and efficiency. An analysis of the factors affecting wear is given, including mechanical, temperature and operational loads. Calculations are performed confirming the effectiveness of using modern materials, improved lubrication systems and optimized process modes. It is shown that the comprehensive implementation of the proposed solutions can significantly reduce the wear rate, reduce maintenance and repair costs, and ensure stable generator performance. The recommendations presented can serve as a basis for upgrading existing equipment and designing new power plants.

Keywords: building structures, metal structures, energy facilities, stress-strain state, technical expertise

This paper explores the development and application of a neuro-inspired automated system for greenhouse microclimate control. The relevance of the topic stems from the need to improve the resilience of agricultural production in the context of population growth and climate change. The proposed system architecture includes a hierarchical sensor network based on STM32 microcontrollers, an analysis module implemented on a Raspberry Pi 5 with neural network-based data processing, and a distributed actuator layer. The paper describes telemetry processing methods, device addressing and polling algorithms, as well as neural network models (YOLO and EfficientNetB3) used for plant disease diagnostics. An experimental evaluation of the classification model demonstrated high accuracy and confirmed the system’s capability for real-time operation.

Keywords: greenhouse automation, microclimate, neural network analysis, STM32, Raspberry Pi, deep learning, YOLO, EfficientNet, IoT, plant disease classification