The work is devoted to the study of algorithms of control subsystem as part of the integrated onboard control system of the aircraft and used in the final part of the trajectory. Algorithms of control subsystems are synthesized on the basis of the theory of optimized delta-transformations of the second order using the principle of the inverted pendulum on a cart. The studies based on the simulation using the developed software model, allowed to estimate as the impact dispersion, and the contribution to it of various subsystems.

Keywords: terminal control, aircraft, on-board integrated control system, optimized delta transformation of the second order, autonomous short range radionavigation system, simulation, software model

The results of research of raw materials of the logs production for timber construction are considered in the article. Length of logs (for 6 meters assortment), diameter of logs (model logs) and shape of butt (an average shape factor of butt) were studied. The model log is a volume of cylinder which is equal to a calculated volume of logs. The theoretical laws of the random variable for these values are found. The Research was conducted at LLC "Biogran" in Petrozavodsk, Republic of Karelia.

Keywords: Woodworking, cylindering, technological line, wood costraction, factors, length of a log, diameter of a log, butt

In the article authors examine specificities of internal components behavior changing in fiber-optical cable under influence of strong variable uniform electromagnetic field. There are some process variations proposed for describing of obtained results.

Keywords: fiber-optical cable, electrothermal degradation, kevlar, conductivity, open fiber-optical cable, partial discharges, water treeing

The article describes peculiarities of modern syntax parser systems and problems originating in text analysis. As a result of comparative analysis the authors propose a unified approach to processing of unstructured texts in Russian and English which combines morphology and syntax processing. The developed syntax analysis system, using verbs’ valency dictionary, samples of minimal structural schemes of sentences and samples of conjunctions, allows choosing predicative structures of sentences in the text, realizing initial semantic analysis due to semantic content of predicate’s actants and building trees of syntactical subordination of sentences. The derived trees hold elements of tree of constitutives and tree of dependences. The proposed samples and rules organization allows resolving some of the problems of modern parsers. And the use of verbs’ valency dictionary allows reducing the number of sentences syntax analysis variants.

Keywords: automatic text processing; syntax parser; morphological analysis; structural text elements

The article describes a tool for continuous improvement of qualifications of labor by measuring compliance with the existing standards of the employee's qualifications. There was done Investigation has been done of the influence of the system of certification of professional qualifications at the level of productivity and economic efficiency of an economic entity.

Keywords: certification of qualifications, workforce, competence, knowledge, certificate, professional standard

Described a variety of available master data integration methods and techniques. Proposed a method for data enrichment in connected autonomous systems based on applying custom written master data access functions available via global meta catalog.

Keywords: data integration, master data, business processes, enterprise service bus, enterprise application integration

In this work experimentally investigated the possibilities of the new method of obtaining adjustable roughness on metal surfaces electrothermal influence of mobile cathode spots in vacuum arc discharge. Presents the results of processing of various surfaces using this method. Proposed working modes of processing of metal surfaces with the aim to receive as minimum and maximum roughness.

Keywords: roughness of metal surfaces, vacuum arc discharge, cathodic spots

The article is devoted to the system of designing multifunctional reconfigurable intelligent sensors (MRIS), examines results of application of MRIS in development of educational laboratory test benches for monitoring of parameters of environment

Keywords: intelligent sensors, system developing, MRIS, educational laboratory test benches

In the present work proposes a specified description of potential functions when the free spreading  in the two-dimensional turbulent flow of planning. In contrast to previous decisions, new parameter satisfies the continuity of flow when the flow flowing  from rectangular tubes on the discharging  track  

Keywords: final line of motion, lines of equal potential, horizontal rectangular tube, diverting from the mainstream flow

In this paper is offered hydraulic sensor to measure the kinematic, power and energy parameters. Developed scheme and the principles of the hydraulic sensor.  Identification  on the special flow lab with real modes of the device is determined by its performance in different conditions. Approximation of the results received dependences flow and pressure drop characteristics on the speed and entrance pressure, allowed more correctly assess and describe the operation of the hydraulic sensor over the entire range of speed and entrance pressure.

Keywords: hydraulic sensor, spilling method, flow and pressure drop characteristics, multifunction control unit.

Questions of modernization of higher education on the basis of development of structure of the hi-tech information and educational environment of technical college are considered. Transition to new structure of the educational IT infrastructure aimed at formation of open educational system, meeting modern requirements to engineering preparation is carried out. 

Keywords: transformativny training, holistichesky approach, the information and educational space, the integrated system

An analysis of the problem of increasing the efficiency of the functioning of the logging trucks for hauling timber to the lower timber depots and consumers. Proposed technical solutions for of raising cross-trains in complex natural and industrial environments.

Keywords: Active semi-trailer used forestry, passableness, prosary operation.

The temperature dependencies of the main parameters of p-channel MOSFET model in a temperature range 20 ... 300 K are measured. The universal formal four-parametric model, which allows approximating all experimental temperature dependencies with the relative error less than 1 % is proposed. The model is intended for the MOSFETs which are applying in low-noise amplifiers of the radio-receiving devices of an optical and infrared range on astronomical satellites, radio telescopes and space observatories. The presented results can be used to simulate the temperature modes of MOSFET amplifiers in SPICE-type electronic simulators. The solution of this problem will predict uptime device when the temperature changes in the cases of emergency or extraordinary situations and also will allow optimizing the choice of refrigerant and increasing the reliability of the amplifier in the conditions of cryogenic temperatures.

Keywords: MOSFET, MOSFET parameters, cryogenic temperature, parameters measurement, temperature dependencies

The method of digital parametric measurement of the phase shift of signals with slowly varying amplitudes of the same slowly varying instantaneous frequencies was proposed. The numerical simulations and experiments on the developed hardware and software system were carried out. The error of measurement the phase difference of harmonic signals in the experiments were not more than  0,00001 radian. The method can be used in applications where the measured value is expressed in terms of the phase difference of quasi-harmonic signals.

Keywords: quasi-harmonic signal, phase shift, real time measurements, hardware and software system

A mathematical model of a surface mini-ship "Neptune", including a mathematical model of the actuators. Used to identify the parameters of the mathematical model. analysis of stability and controllability of surface mini-vehicle for its mathematical model.

Keywords: mathematical model, surface mini-ship, handling, stability