×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

Influence of slag-alkali binder structure modifiers on cracking

Abstract

Influence of slag-alkali binder structure modifiers on cracking

Romanenko I.I., Fadin A.I., Petrovnina I.N., Romanenko M.I.

Incoming article date: 21.05.2021

The purpose of the study is to determine an effective modifier of the structure of a slag-alkaline stone, characterized by a low value of linear shrinkage and a decrease in cracking in the early stages of hardening. Ground blast furnace slags were activated with aqueous solutions based on sodium silicate and caustic soda. Fly ash and zeolite-containing clay were used as modifiers of the cement stone structure at a dosage of 5, 10 and 15% of the binder consumption. The results of the study showed that an increase in fly ash content does not significantly affect the setting time. The use of zeolite-containing clay as a slag-alkali binder modifier makes it possible to regulate the setting time of the binder at a dosage of more than 10%. Cracking of the slag-alkaline matrix was observed only for mixtures without fly ash and zeolite-containing clay.

Keywords: cement stone, slag-alkali binder, hardening activator, structure modifier, fly ash, zeolites, shrinkage, cracking