Contact zone shear test results using breaking load

Abstract

Contact zone shear test results using breaking load

Kuznecov V.V., Sapozhnikov P.V., Kocherzhenko V.V., Marchenko A.V., Ziyatdinova I.N.

Incoming article date: 22.04.2024

The article deals with the peculiarities of the results of tests carried out to determine the characteristics of the contact zone organized by stamping on a steel plate. During the test, the specimen was in the steel mold in which it was manufactured. The steel form was used to prohibit horizontal movement of the steel thin plates and minimize the effect of uneven slippage of the steel gouge in the direction perpendicular to the shear force. The considered tests were carried out according to a specially developed methodology, which took into account the specifics of the contact zone shear operation, the applied tooling and took into account the set objectives of the study.

Keywords: contact zone, contact characteristics, test methodology, shear tests, stamping, composite design